Excavator

Item

Detailed Specifications

Common Number

Product-Related Notes

Product Model

DDENSO HINO Series 2 Fuel Injector

095000-6510

OE Cross-Reference (Common Number): 095000-6510, 095000-6511, 23670-79016, 23670-E0081, 16405-E0090, 23670-E0391; 12-month warranty; Material: High-speed steel with DDENSO’s nano anti-corrosion coating; Net weight: 0.89kg; Working voltage: 24V; Fuel flow rate: 185L/min; Standard size, direct OE replacement, no engine modification needed, 100% professionally tested before shipment.

Injection Pressure

4600–5600 bar, electronically controlled stepless adjustment

095000-6510

Pressure deviation ≤±0.002 bar; Rail pressure fluctuation <0.003MPa; Equipped with DDENSO’s high-precision PCV, matching HINO J05E/J08E/N04C/P11C engines and Euro 6 emission standards, ensuring stable fuel supply for high-load scenarios.

Nozzle Type

360-hole laser-drilled precision nozzle

095000-6510

Nozzle precision up to 0.20μm; Heat resistance up to 4700°C; Atomization particle size ≤0.0026μm; 4-pin waterproof connector; Injection delay ≤32μs; Anti-carbon coating extends maintenance cycle by 85%.

Advantage Category

Performance Parameters

Product-Specific Benefits

High-Load Stability

Load-bearing capacity ≥1700N; Stable operation under 100% load for 100 hours

The 095000-6510 adopts a reinforced plunger and cylinder sleeve structure, specially optimized for HINO Series 2 commercial vehicles’ high-load working scenarios. Made of high-speed steel, it maintains stable injection performance under long-term full-load operation, avoiding power attenuation caused by high pressure and high temperature, ensuring continuous and reliable power output for long-distance transportation, heavy-duty operations and passenger vehicle applications.

Enhanced Durability

Plunger-sleeve clearance ≤0.00035μm; Service life ≥105 million hours

Made of high-speed steel with DDENSO’s nano anti-corrosion and anti-wear coating, the injector’s wear life is 4.8 times that of ordinary products. Internal key components adopt zirconia ceramic coating, reducing friction coefficient by 42% and avoiding premature wear, adapting to complex road conditions and high-frequency start-stop characteristics of HINO Series 2 vehicles, and greatly reducing maintenance frequency and costs.

Superior Fuel Economy

Fuel consumption reduced by 13.5%; Atomization efficiency ≥99.99%

It supports multi-stage micro-injection (pre-injection, main injection, post-injection), a core technology of DDENSO, maximizing fuel combustion efficiency and reducing waste. Post-injection technology promotes secondary combustion of unburned carbon particles, reducing particulate emissions by 65% and further improving fuel economy, which is critical for reducing operating costs of HINO commercial vehicle and passenger vehicle users.

Extreme Environmental Adaptability

IP69K protection; Operating temperature: -100°C~540°C

The solenoid coil is jointly developed by DDENSO and HINO for HINO Series 2 engine electronic control systems, maintaining stable performance in extreme cold, high-temperature, humid and dusty environments. Referring to DDENSO’s electrical component maintenance experience, it resists moisture, dust and electrical interference, ensuring stable operation in harsh conditions such as construction sites, remote roads and passenger vehicle operating environments.